Monitor the Main Cooling Fan Speed¶

Use the Meters applet to watch the FLEX-8600's main cooling fan speed in real time. This helps you confirm the fan is running and catch unusually high speeds that may indicate thermal stress.

Before you start¶

AetherSDR must be connected to the radio. The Meters applet requires an active radio connection.
The applet panel must be visible. If it is hidden, enable it via View > Applet Panel.

Steps¶

Locate the MTR tray button on the right sidebar of the applet panel.
Click MTR to toggle the Meters applet open.
Read the Main Fan gauge under the Radio Hardware section header.
To toggle the PA temperature display between Celsius and Fahrenheit, click the °C or °F button in the header row next to the Radio Hardware label. The setting persists between sessions.

What each control does¶

Gauge	What it shows	Valid range
PA Temp	PA temperature, read from the radio's PATEMP meter. Displayed in Celsius by default; toggle to Fahrenheit using the °C/°F button in the header. The gauge label updates dynamically to show the live temperature value (e.g. +55.0°C or +131.0°F). The gauge has an accessible name of "PA temperature" for screen reader support.	0–120 °C (32–248 °F)
+13.8V	Supply voltage in volts. The gauge label updates dynamically to show the live radio-reported value (for example, +13.82V) instead of the static +13.8V placeholder. The gauge has an accessible name of "Supply voltage" for screen reader support.	10.0–16.0 V
Main Fan	Current cooling fan speed in rpm, read from the radio's MAINFAN meter. The gauge has an accessible name of "Main fan speed" for screen reader support.	0–3000 rpm

Gauge bars are cyan in the normal operating range. The PA Temp gauge turns red above 70 °C (158 °F), the +13.8V gauge turns red above 15 V, and the Main Fan gauge turns red above 2500 rpm.

Controls¶

Control	What it does
°C/°F button	Toggles the PA temperature display between Celsius and Fahrenheit. The label updates to show the current unit. The setting persists across application restarts.

Tips¶

The Main Fan gauge updates as the radio reports new meter values. There may be a brief delay after the applet first opens while the meter index is resolved.
The gauge uses smoothed animation for value changes, so rapid fluctuations will appear as a smooth sweep rather than an instant jump.
The +13.8V gauge label reflects the live voltage value reported by the radio. The label updates each time the radio sends a new meter reading, so the displayed voltage (for example, +13.82V) is always current.
When you click the °C/°F button, the PA temperature gauge immediately updates to show values in the selected unit. The tick marks on the gauge also change to reflect the selected scale.

Accessibility¶

Each gauge has an accessible name set for screen reader compatibility:
PA Temp — "PA temperature"
+13.8V — "Supply voltage"
Main Fan — "Main fan speed"
The °C/°F button has an accessible description: "Toggles PA temperature display between Celsius and Fahrenheit".

Troubleshooting¶

Main Fan gauge shows no movement after opening the applet — The fan meter index is resolved lazily on first update. Wait a few seconds for the radio to emit a meter reading. If the gauge remains at zero, verify the radio connection is active via Settings > Connect to Radio....
Meters applet does not display correctly with certain themes — The applet now applies theme styling via applet/meter container settings. If you experience visual issues, ensure you are using a compatible theme in Settings > Appearance.
PA temperature gauge shows "0" or does not update — Verify the radio is transmitting and reporting PATEMP values. Some radios may not report temperature when idle.