Waveforms overview¶

The Waveforms dialog mirrors the SmartSDR File > Waveforms panel, letting you view the WFP (Waveform Processor) status and manage installed waveforms on your FLEX-8600 radio. Use it to check whether the waveform processor is powered and ready, see its IP address, and restart or remove individual waveforms.

How it works¶

The dialog connects directly to the radio's FlexWaveformModel for live status updates. It shows WFP power state, readiness, and IP address at the top, followed by a list of installed waveforms with per-row controls.

What each control does¶

Control	Behavior	Notes
WFP Status	Displays waveform processor power status, ready state, and IP address.	New in v26.5.2.1.
Installed Waveforms	Lists installed waveforms with Restart and Remove/Uninstall buttons per row.	Connects to FlexWaveformModel for live status.

How to open¶

File > Waveforms...

Requirements¶

A radio connection must be active (the dialog requires radio connectivity).

Tips¶

The dialog is non-modal, so you can keep it open while operating the radio.
Use the Restart button to reload a waveform without removing and reinstalling it.
Use Remove/Uninstall to delete an unwanted waveform from the radio.
The dialog applies the current theme's styling for waveforms windows, ensuring visual consistency with other dialogs.

Radio Setup... — Configure radio connection, audio, antenna, and band settings.