Change CW Send Speed in WPM¶
Adjust the CW keying speed so the radio sends at the WPM rate you need. The speed setting is available at all times from the bottom bar of the CWX panel.
Before you start¶
- Connect to a FLEX-8600 radio. The CWX panel requires an active radio connection.
- Open the CWX panel. It appears in the main window area when the active slice is in CW, CWL, or CWU mode.
Steps¶
- Locate the Speed: spinbox in the bottom bar of the CWX panel.
- Click the spinbox and type a value, or use the up/down arrows to adjust the speed.
- The new speed takes effect immediately. The value is saved as
CwxSpeedWpm.
What each control does¶
| Control | Default | Valid range | Setting key | Behavior |
|---|---|---|---|---|
| Speed: | 20 | 5–100 WPM | CwxSpeedWpm |
Sets the CW keying speed in words per minute. |
How the Send, Live, and Setup buttons behave¶
The three view buttons in the top bar of the CWX panel changed behavior in v0.9.2.1.
| Button | Kind | Behavior |
|---|---|---|
| Send (view) | Push button | If Live mode is currently off, clicking Send submits the typed buffer immediately and stays in the Send view. If Live mode is currently on, clicking Send first turns Live mode off and returns the panel to the normal typing view without retransmitting any text that was already keyed character-by-character. |
| Live (view) | Toggle button | Toggles Live mode on or off. When toggled on, the panel switches to the Send view and the radio begins keying characters as you type them. Turning Live off does not clear the buffer. Navigating to Setup while Live is on automatically turns Live off. |
| Setup (view) | Push button | Shows the macro editor and QSK setup. Opening Setup always turns Live mode off before displaying the Setup view. |
Note: Prior to v0.9.2.1, Send was a checkable button that acted as part of a mutually exclusive toggle group with Live and Setup. It is now a plain push button whose action depends on whether Live mode is active when you click it.
Live mode state is preserved on reconnect¶
When a model is attached to the CWX panel (for example, after connecting to the radio), the Live button is updated to reflect the current Live state reported by the radio. This means if Live mode was active before a disconnect, the button will show the correct state when the connection is restored.
Tips¶
- The Speed: spinbox is visible in all three views (Send, Live, and Setup). You do not need to switch views to change speed.
- Press Escape at any time to abort a transmission in progress without changing the speed setting.
- If you are in Live mode and want to type ahead without transmitting, click Send to exit Live mode before continuing to type. The panel will not re-send any characters that were already transmitted.