Enable multiFLEX on the radio

Use the multiFLEX Dashboard to turn multiFLEX on or off on the connected FLEX-8600. Enabling multiFLEX allows multiple client stations to share the radio simultaneously.

Before you start

• AetherSDR must be connected to a FLEX-8600 radio. multiFLEX Dashboard requires an active radio connection.

Steps

1. Click Settings > multiFLEX... to open the multiFLEX Dashboard.
2. Click the toggle button in the center of the dialog. When multiFLEX is disabled, the button reads Disabled. When enabled, it reads Enabled.
3. Click Close to dismiss the dialog.

What each control does

Control	Behavior
Enabled / Disabled button	Toggles multiFLEX on or off on the radio. The button label and color reflect the current state: Enabled (green) or Disabled (red).
Stations table	Lists every multiFLEX client currently connected to the radio. Columns: LOCAL PTT, STATION, TX ANT, TX FREQ (MHz).
Enable (PTT)	Toggles local PTT authority for this station. Only shown when more than one client is connected and this station does not currently hold PTT.
Close	Closes the multiFLEX Dashboard dialog.

Tips

• Your station's entry in the Stations table is highlighted in blue. Other connected stations appear in the default color.
• When only one client is connected, the LOCAL PTT controls are hidden automatically.

Related

• multiFLEX Dashboard overview
• Grant or revoke local PTT
• Check which antenna and frequency each TX station is using
• See all stations connected to this FLEX