Switch to a saved transmit profile¶
Load a previously saved transmit profile onto the radio. This applies a stored set of TX parameters in one step, replacing the current transmit settings.
Before you start¶
- AetherSDR must be connected to the radio. Profile Manager requires an active radio connection.
- At least one transmit profile must already exist on the radio. If the profile list is empty, save a profile first.
Steps¶
- Click
Profiles > Profile Manager...to open the Profile Manager dialog. - Click the Transmit (tab) to switch to the transmit profile list.
- Click the profile you want to load in the Profile list. The active profile is highlighted.
- Click Load.
Alternatively, double-click any entry in the Profile list to load it without clicking Load.
What each control does¶
| Control | Kind | Behavior | Setting key |
|---|---|---|---|
| Transmit (tab) | Tab | Switches the dialog to the transmit profile view. | — |
| Profile list | List | Shows all transmit profiles stored on the radio. The currently active profile is highlighted. | — |
| Profile name | Text field | Populated automatically when you select an item in the list. Used when saving; not required for loading. | — |
| Load | Button | Sends the selected profile to the radio, replacing current TX settings. Enabled only when a profile is selected. | — |
| Save | Button | Saves the current radio TX state under the name in Profile name. | — |
| Delete | Button | Deletes the selected profile after confirmation. Enabled only when a profile is selected. | — |
| Auto-save profile changes | Checkbox | When checked, TX setting changes are written back to the active profile automatically. | AutoSaveTransmitProfile |
Tips¶
- Selecting a profile in the list fills the Profile name field with that profile's name. If you then click Save, the current TX state overwrites that profile under the same name.
- If you want TX changes to persist to the active profile without manually clicking Save each time, enable Auto-save profile changes on the Auto-Save (tab).
Troubleshooting¶
- Load is grayed out — No profile is selected in the Profile list. Click a profile name to select it, then click Load.
- Profile list is empty — No transmit profiles exist on the radio yet. Use Save to create one first.