Add a memory at current frequency¶
Open the Memory Channels dialog and save the active VFO frequency as a new memory channel entry. Use this to bookmark a frequency you want to return to later.
Before you start¶
- Connect to a FLEX-8600 radio. The Memory Channels dialog requires an active radio connection.
- Tune the active slice to the frequency you want to store.
Steps¶
- Click
Settings > Memory...to open the Memory Channels dialog. - Click
Add.
A new row appears in the memory table populated with the current VFO frequency. The memory is saved immediately to the radio.
- To give the memory a name or adjust other fields, select the new row and click
Edit, then modify the fields inline. See Edit a memory's name, mode or offset inline.
What each control does¶
| Control | Description |
|---|---|
Add |
Creates a new memory row at the current VFO frequency. |
Edit |
Enters inline-edit mode on the selected row so you can update fields such as Name, Group, Mode, or offset values. |
| Memory table | Displays all stored memories. Columns include Group, Owner, Frequency, Name, Mode, Step, FM TX Offset Dir, Repeater Offset, Tone Mode, Tone Value, Squelch, Squelch Level, RX Filter Low, RX Filter High, RTTY Mark, RTTY Shift, DIGL Offset, and DIGU Offset. |
Tips¶
- Double-clicking a row in the memory table tunes the active slice to that memory directly.
- To find the memory you just added, use the
Search:field to filter by name, or sort the Frequency column by clicking the column header.