Turn on auto-save so TX tweaks always persist¶
When auto-save is enabled, any changes you make to TX and microphone settings are written back to the active profile automatically, so you never lose a tweak by forgetting to save manually.
Before you start¶
- AetherSDR must be connected to the radio. The Profile Manager requires an active radio connection.
- At least one transmit or microphone profile must already exist on the radio for auto-save to have a profile to write to.
Steps¶
- Click
Profiles > Profile Manager...to open the Profile Manager dialog. - Click the Auto-Save tab.
- Check Auto-save profile changes.
- Click Close.
The setting takes effect immediately. AetherSDR sends the change to the radio; no restart is required.
To turn auto-save off, repeat the steps and uncheck Auto-save profile changes.
What each control does¶
| Control | Kind | Behavior | Setting key |
|---|---|---|---|
| Auto-save profile changes | Checkbox | When checked, TX and microphone setting changes are automatically saved to the active profile on the radio. When unchecked, changes are discarded unless you save manually. | AutoSaveTransmitProfile |
Tips¶
- Auto-save applies to both TX and microphone settings, not just one category. If you want to experiment without overwriting your current profile, uncheck Auto-save profile changes first, make your changes, and evaluate before committing a manual save.
- The checkbox reflects the current state reported by the radio when the dialog opens. If another client changed the setting on the radio, the checkbox updates to match.