| antenna-genius |
auto-discover-an-antenna-genius-on-the-lan.md |
Actualizado |
2026-05-02 |
| antenna-genius |
enable-auto-mode-so-the-ag-follows-radio-band-changes.md |
Actualizado |
2026-05-02 |
| antenna-genius |
overview.md |
Actualizado |
2026-05-02 |
| antenna-genius |
select-an-antenna-for-port-a-or-port-b.md |
Actualizado |
2026-05-02 |
| antenna-genius |
spot-which-antennas-cannot-tx-on-the-current-band-amber-or-dim.md |
Actualizado |
2026-05-02 |
| antenna-genius |
swap-radios-that-share-the-ag-antennas-in-use-by-the-other-port-are-locked-out.md |
Actualizado |
2026-05-02 |
| cat-control |
autostart-cat-servers-with-aethersdr.md |
Actualizado |
2026-05-02 |
| cat-control |
change-the-base-tcp-port.md |
Actualizado |
2026-05-02 |
| cat-control |
enable-cat-pty-so-linux-macos-apps-can-open-a-serial-style-cat-port.md |
Actualizado |
2026-05-02 |
| cat-control |
enable-cat-tcp-so-n1mm-log4om-wsjt-x-can-control-the-radio.md |
Actualizado |
2026-05-02 |
| cat-control |
overview.md |
Actualizado |
2026-05-02 |
| client-chain |
bypass-every-rx-stage-at-once.md |
Actualizado |
2026-05-02 |
| client-chain |
bypass-every-tx-stage-at-once.md |
Actualizado |
2026-05-02 |
| client-chain |
open-a-stage-s-frameless-floating-editor-from-the-chain.md |
Actualizado |
2026-05-02 |
| client-chain |
overview.md |
Actualizado |
2026-05-02 |
| client-chain |
play-back-the-captured-pudu-audio.md |
Actualizado |
2026-05-02 |
| client-chain |
re-enable-a-specific-stage-after-a-global-bypass.md |
Actualizado |
2026-05-02 |
| client-chain |
record-up-to-30-seconds-of-post-pudu-tx-audio.md |
Actualizado |
2026-05-02 |
| client-chain |
reorder-the-rx-dsp-chain-independent-of-tx-order.md |
Actualizado |
2026-05-02 |
| client-chain |
reorder-the-tx-dsp-chain.md |
Actualizado |
2026-05-02 |
| client-chain |
see-at-a-glance-whether-pc-audio-the-noise-reducer-and-audio-output-are-live-rx-status-tiles.md |
Actualizado |
2026-05-02 |
| client-chain |
switch-between-editing-the-tx-and-rx-chains.md |
Actualizado |
2026-05-02 |
| client-chain |
visually-confirm-when-tx-mox-is-live.md |
Actualizado |
2026-05-02 |
| client-eq |
adjust-post-eq-output-gain-with-the-output-fader.md |
Nuevo |
2026-05-02 |
| client-eq |
change-a-band-s-filter-type-by-clicking-its-icon-in-the-icon-row.md |
Nuevo |
2026-05-02 |
| client-eq |
change-the-hp-lp-filter-family-butterworth-chebyshev-bessel-elliptic.md |
Nuevo |
2026-05-02 |
| client-eq |
drag-the-tx-or-rx-filter-cutoff-guide-line-to-move-the-radio-passband.md |
Nuevo |
2026-05-02 |
| client-eq |
freeze-the-analyzer-peak-hold-trace-to-spot-resonances-while-tuning.md |
Nuevo |
2026-05-02 |
| client-eq |
monitor-post-eq-peak-level-on-the-output-fader-meter.md |
Nuevo |
2026-05-02 |
| client-eq |
read-exact-freq-gain-q-values-in-the-parameter-text-row.md |
Nuevo |
2026-05-02 |
| client-eq |
reset-all-eq-bands-to-the-default-10-band-template.md |
Nuevo |
2026-05-02 |
| client-eq |
smooth-the-analyzer-display-for-easier-reading-with-the-smoothing-combo.md |
Nuevo |
2026-05-02 |
| client-eq |
bypass-the-eq-stage-from-the-chain.md |
Actualizado |
2026-05-02 |
| client-eq |
inspect-the-rx-eq-curve-and-live-spectrum.md |
Actualizado |
2026-05-02 |
| client-eq |
inspect-the-tx-eq-curve-and-live-spectrum.md |
Actualizado |
2026-05-02 |
| client-eq |
open-the-frameless-editor-to-add-remove-tune-bands-on-either-side.md |
Actualizado |
2026-05-02 |
| client-eq |
overview.md |
Actualizado |
2026-05-02 |
| client-eq |
verify-the-summed-curve-matches-your-mental-target.md |
Actualizado |
2026-05-02 |
| client-gate |
set-return-to-prevent-gate-chatter-near-threshold.md |
Nuevo |
2026-05-02 |
| client-gate |
tune-release-for-natural-gate-close.md |
Nuevo |
2026-05-02 |
| client-gate |
bypass-the-gate-from-the-chain.md |
Actualizado |
2026-05-02 |
| client-gate |
choose-gate-vs-soft-expander-behaviour-via-ratio.md |
Actualizado |
2026-05-02 |
| client-gate |
overview.md |
Actualizado |
2026-05-02 |
| client-gate |
set-floor-to-avoid-unnatural-silence-between-words.md |
Actualizado |
2026-05-02 |
| client-gate |
set-tx-threshold-just-above-room-noise-floor.md |
Actualizado |
2026-05-02 |
| client-gate |
tune-attack-release-for-natural-open-close.md |
Actualizado |
2026-05-02 |
| client-gate |
use-agc-t-on-rx-to-suppress-band-noise-below-a-chosen-floor.md |
Actualizado |
2026-05-02 |
| client-gate |
watch-live-gr-while-not-speaking.md |
Actualizado |
2026-05-02 |
| client-level-meter |
overview.md |
Nuevo |
2026-05-02 |
| client-level-meter |
read-the-output-level-meter-on-the-tube-applet.md |
Nuevo |
2026-05-02 |
| client-tube |
monitor-output-clipping-with-the-level-meter-in-the-editor.md |
Nuevo |
2026-05-02 |
| client-tube |
parallel-blend-saturation-with-dry-wet.md |
Nuevo |
2026-05-02 |
| client-tube |
select-a-tube-character-model-a-b-or-c-to-change-harmonic-flavour.md |
Nuevo |
2026-05-02 |
| client-tube |
shift-bias-to-tweak-the-harmonic-balance.md |
Nuevo |
2026-05-02 |
| client-tube |
tune-attack-and-release-for-natural-sounding-envelope-following.md |
Nuevo |
2026-05-02 |
| client-tube |
use-envelope-to-add-dynamic-drive-on-transients.md |
Nuevo |
2026-05-02 |
| client-tube |
brighten-or-darken-the-saturated-signal-with-tone.md |
Actualizado |
2026-05-02 |
| client-tube |
bypass-the-tube-from-either-chain.md |
Actualizado |
2026-05-02 |
| client-tube |
compensate-level-changes-with-output.md |
Actualizado |
2026-05-02 |
| client-tube |
dial-drive-until-the-curve-starts-to-bend-tx-warmth-or-rx-tone-shaping.md |
Actualizado |
2026-05-02 |
| client-tube |
overview.md |
Actualizado |
2026-05-02 |
| client-tube |
parallel-blend-saturation-with-mix.md |
Actualizado |
2026-05-02 |
| client-tube |
read-the-output-level-meter-on-the-tube-applet.md |
Actualizado |
2026-05-02 |
| client-tube |
shift-bias-to-tweak-the-even-odd-harmonic-balance.md |
Actualizado |
2026-05-02 |
| concepts |
understanding-slices.md |
Actualizado |
2026-05-02 |
| connection |
enable-low-bandwidth-mode-for-slow-links.md |
Actualizado |
2026-05-02 |
| connection |
log-in-to-smartlink-to-see-remote-radios.md |
Actualizado |
2026-05-02 |
| connection |
overview.md |
Actualizado |
2026-05-02 |
| connection |
retry-discovery-when-no-radios-appear.md |
Actualizado |
2026-05-02 |
| cwx |
change-cw-send-speed-in-wpm.md |
Actualizado |
2026-05-02 |
| cwx |
edit-a-cw-macro-string.md |
Actualizado |
2026-05-02 |
| cwx |
enable-qsk-full-break-in.md |
Actualizado |
2026-05-02 |
| cwx |
look-up-the-prosign-character-shortcuts.md |
Actualizado |
2026-05-02 |
| cwx |
overview.md |
Actualizado |
2026-05-02 |
| cwx |
send-a-typed-cw-buffer-live.md |
Actualizado |
2026-05-02 |
| cwx |
trigger-a-cw-macro-with-f1-f12.md |
Actualizado |
2026-05-02 |
| dx-cluster |
auto-reload-adif-log-when-updated-by-a-logger.md |
Actualizado |
2026-05-02 |
| dx-cluster |
clear-all-spots-from-the-panadapter.md |
Actualizado |
2026-05-02 |
| dx-cluster |
enable-dxcc-coloring-from-an-adif-log.md |
Actualizado |
2026-05-02 |
| dx-cluster |
enable-freedv-qso-reporter-websocket.md |
Actualizado |
2026-05-02 |
| dx-cluster |
enable-spotcollector-udp-feed.md |
Actualizado |
2026-05-02 |
| dx-cluster |
overview.md |
Actualizado |
2026-05-02 |
| dx-cluster |
pick-colors-for-each-spot-source.md |
Actualizado |
2026-05-02 |
| dx-cluster |
poll-pota-activations.md |
Actualizado |
2026-05-02 |
| dx-cluster |
start-wsjt-x-udp-listener-and-filter-for-cq-pota-or-calls-to-me.md |
Actualizado |
2026-05-02 |
| dx-cluster |
tune-spot-density-position-font-size-and-lifetime.md |
Actualizado |
2026-05-02 |
| dx-cluster |
tune-to-a-spot-by-double-clicking-the-spot-list.md |
Actualizado |
2026-05-02 |
| index.md |
index.md |
Actualizado |
2026-05-02 |
| menu-actions |
submit-your-idea.md |
Nuevo |
2026-05-02 |
| panadapter |
fix-a-static-stale-spectrum-in-a-popped-out-panadapter-on-macos.md |
Nuevo |
2026-05-02 |
| panadapter |
click-the-spectrum-to-activate-a-panadapter-multi-slice-mode.md |
Actualizado |
2026-05-02 |
| panadapter |
close-an-extra-panadapter.md |
Actualizado |
2026-05-02 |
| panadapter |
copy-decoded-cw-text-to-the-clipboard.md |
Actualizado |
2026-05-02 |
| panadapter |
lock-cw-decoder-pitch-or-speed-once-tracking-is-good.md |
Actualizado |
2026-05-02 |
| panadapter |
maximize-one-panadapter-to-fill-the-main-area.md |
Actualizado |
2026-05-02 |
| panadapter |
overview.md |
Actualizado |
2026-05-02 |
| panadapter |
pop-a-panadapter-out-into-its-own-window.md |
Actualizado |
2026-05-02 |
| panadapter |
tune-cw-decoder-sensitivity-to-reject-noise.md |
Actualizado |
2026-05-02 |
| panadapter |
turn-on-the-cw-decoder-to-read-morse-off-air.md |
Actualizado |
2026-05-02 |
| phone |
adjust-am-carrier-power-for-am-transmit.md |
Actualizado |
2026-05-02 |
| phone |
enable-vox-and-set-trigger-threshold.md |
Actualizado |
2026-05-02 |
| phone |
overview.md |
Actualizado |
2026-05-02 |
| phone |
set-the-tx-audio-high-cut-frequency.md |
Actualizado |
2026-05-02 |
| phone |
set-the-tx-audio-low-cut-frequency.md |
Actualizado |
2026-05-02 |
| phone |
tune-vox-hang-time.md |
Actualizado |
2026-05-02 |
| phone-cw |
enable-the-low-latency-cw-sidetone-sidetone-button-drives-both-radio-and-local-path.md |
Nuevo |
2026-05-02 |
| phone-cw |
pan-the-cw-sidetone-left-or-right.md |
Nuevo |
2026-05-02 |
| phone-cw |
adjust-mic-gain-and-enable-the-accessory-mix.md |
Actualizado |
2026-05-02 |
| phone-cw |
change-cw-pitch-sidetone-frequency.md |
Actualizado |
2026-05-02 |
| phone-cw |
enable-iambic-paddle-keying.md |
Actualizado |
2026-05-02 |
| phone-cw |
enable-speech-processor-at-nor-dx-or-dx-level.md |
Actualizado |
2026-05-02 |
| phone-cw |
enable-the-low-latency-local-cw-sidetone-local-stn-for-fast-paddle-straight-key-cwx-work.md |
Actualizado |
2026-05-02 |
| phone-cw |
listen-to-a-tx-sidetone-monitor.md |
Actualizado |
2026-05-02 |
| phone-cw |
make-the-local-sidetone-pitch-follow-the-radio-s-cw-pitch-or-set-it-manually-with-the-slider.md |
Actualizado |
2026-05-02 |
| phone-cw |
overview.md |
Actualizado |
2026-05-02 |
| phone-cw |
pick-a-mic-source-mic-bal-line-acc-pc.md |
Actualizado |
2026-05-02 |
| phone-cw |
select-a-mic-profile-for-a-specific-microphone.md |
Actualizado |
2026-05-02 |
| phone-cw |
set-cw-break-in-delay.md |
Actualizado |
2026-05-02 |
| phone-cw |
set-cw-keying-speed-in-wpm.md |
Actualizado |
2026-05-02 |
| phone-cw |
set-the-local-sidetone-volume-independently-of-the-radio-monitor.md |
Actualizado |
2026-05-02 |
| radio-setup |
assign-a-usb-cable-as-cat-bcd-bit-or-ptt.md |
Actualizado |
2026-05-02 |
| radio-setup |
calibrate-the-gpsdo-frequency-offset.md |
Actualizado |
2026-05-02 |
| radio-setup |
change-network-mtu-for-vpn-remote-setups.md |
Actualizado |
2026-05-02 |
| radio-setup |
check-radio-serial-hardware-version-region-and-options.md |
Actualizado |
2026-05-02 |
| radio-setup |
choose-pc-input-output-audio-devices.md |
Actualizado |
2026-05-02 |
| radio-setup |
configure-flexcontrol-serial-port-pin-functions.md |
Actualizado |
2026-05-02 |
| radio-setup |
create-a-new-transverter-entry.md |
Actualizado |
2026-05-02 |
| radio-setup |
enable-auto-record-on-tx-and-pick-a-save-folder.md |
Actualizado |
2026-05-02 |
| radio-setup |
overview.md |
Actualizado |
2026-05-02 |
| radio-setup |
pick-opus-vs-uncompressed-audio-for-smartlink.md |
Actualizado |
2026-05-02 |
| radio-setup |
select-iambic-mode-a-or-b-for-the-radio-keyer.md |
Actualizado |
2026-05-02 |
| radio-setup |
set-per-band-tx-max-power-and-tune-mode.md |
Actualizado |
2026-05-02 |
| radio-setup |
set-the-radio-nickname-callsign-and-station-name.md |
Actualizado |
2026-05-02 |
| radio-setup |
start-stop-the-nvidia-bnr-container.md |
Actualizado |
2026-05-02 |
| radio-setup |
switch-the-radio-between-dhcp-and-static-ip.md |
Actualizado |
2026-05-02 |
| radio-setup |
switch-to-an-external-10-mhz-reference.md |
Actualizado |
2026-05-02 |
| radio-setup |
toggle-low-latency-vs-sharp-filters-per-bandwidth.md |
Actualizado |
2026-05-02 |
| radio-setup |
turn-on-audio-boost-or-enlarge-the-audio-buffer-for-remote-operation.md |
Actualizado |
2026-05-02 |
| radio-setup |
upload-a-new-firmware-ssdr-to-the-radio.md |
Actualizado |
2026-05-02 |
| remote |
remote-operation-smartlink.md |
Actualizado |
2026-05-02 |
| rx |
fix-stale-slice-tabs-after-switching-to-a-radio-with-fewer-slices.md |
Nuevo |
2026-05-02 |
| rx |
change-mode-usb-lsb-cw-am-fm-etc.md |
Actualizado |
2026-05-02 |
| rx |
lock-the-slice-to-prevent-accidental-retuning.md |
Actualizado |
2026-05-02 |
| rx |
overview.md |
Actualizado |
2026-05-02 |
| rx |
pick-a-filter-width-preset-for-the-current-mode.md |
Actualizado |
2026-05-02 |
| rx |
select-the-rx-or-tx-antenna-for-this-slice.md |
Actualizado |
2026-05-02 |
| rx |
switch-between-multiple-slices-using-the-a-h-tab-row.md |
Actualizado |
2026-05-02 |
| rx |
tune-the-radio-to-a-frequency-type-mhz-in-the-readout.md |
Actualizado |
2026-05-02 |
| rx |
turn-on-the-squelch-and-set-its-threshold.md |
Actualizado |
2026-05-02 |
| rx |
use-rit-to-offset-the-receive-frequency-for-a-drifting-station.md |
Actualizado |
2026-05-02 |
| rx |
use-xit-to-offset-the-transmit-frequency-without-changing-rx.md |
Actualizado |
2026-05-02 |
| rx |
work-an-fm-repeater-with-ctcss-tone-and-offset.md |
Actualizado |
2026-05-02 |
| setup |
fix-tune-not-working-after-upgrading-to-firmware-4-2-configure-direct-tgxl-connection.md |
Nuevo |
2026-05-02 |
| setup |
recover-tgxl-tune-on-firmware-4-2-by-configuring-a-direct-connection.md |
Nuevo |
2026-05-02 |
| setup |
check-how-many-external-clients-are-connected-to-each-channel.md |
Actualizado |
2026-05-02 |
| setup |
connect-by-ip-across-a-vpn-or-routed-network.md |
Actualizado |
2026-05-02 |
| setup |
connect-tgxl-pgxl-or-antenna-genius-by-ip.md |
Actualizado |
2026-05-02 |
| setup |
connect-to-a-dx-cluster.md |
Actualizado |
2026-05-02 |
| setup |
connect-to-a-local-lan-radio.md |
Actualizado |
2026-05-02 |
| setup |
connect-to-a-remote-radio-through-smartlink.md |
Actualizado |
2026-05-02 |
| setup |
connect-to-the-reverse-beacon-network.md |
Actualizado |
2026-05-02 |
| setup |
disconnect-from-the-current-radio.md |
Actualizado |
2026-05-02 |
| setup |
manually-connect-to-an-ag-over-a-remote-network.md |
Actualizado |
2026-05-02 |
| setup |
pick-the-local-network-interface-used-for-a-manual-connection.md |
Actualizado |
2026-05-02 |
| setup |
see-how-many-tci-clients-are-connected.md |
Actualizado |
2026-05-02 |
| shack-switch |
configure-a-dummy-load-antenna-to-protect-the-transmit-path.md |
Nuevo |
2026-05-02 |
| shack-switch |
open-the-shackswitch-web-configuration-interface.md |
Nuevo |
2026-05-02 |
| shack-switch |
overview.md |
Nuevo |
2026-05-02 |
| shack-switch |
resolve-an-input-a-and-input-b-antenna-conflict.md |
Nuevo |
2026-05-02 |
| shack-switch |
select-an-antenna-for-shackswitch-input-a.md |
Nuevo |
2026-05-02 |
| shack-switch |
select-an-antenna-for-shackswitch-input-b.md |
Nuevo |
2026-05-02 |
| slice-troubleshooting |
capture-a-slice-snapshot-for-support.md |
Actualizado |
2026-05-02 |
| slice-troubleshooting |
copy-the-full-json-snapshot-to-the-clipboard.md |
Actualizado |
2026-05-02 |
| slice-troubleshooting |
export-the-snapshot-to-a-file-to-attach-to-a-bug-report.md |
Actualizado |
2026-05-02 |
| slice-troubleshooting |
inspect-each-transverter-s-rf-if-offset-and-validity-flags-for-xvtr-diagnosis.md |
Actualizado |
2026-05-02 |
| slice-troubleshooting |
overview.md |
Actualizado |
2026-05-02 |
| slice-troubleshooting |
read-a-plain-language-list-of-suspected-slice-problems.md |
Actualizado |
2026-05-02 |
| slice-troubleshooting |
refresh-the-snapshot-after-changing-slice-state.md |
Actualizado |
2026-05-02 |
| tci |
fix-tci-tx-silent-on-windows-or-linux-without-pipewire.md |
Nuevo |
2026-05-02 |
| tci |
adjust-tci-rx-gain-per-channel.md |
Actualizado |
2026-05-02 |
| tci |
adjust-tci-tx-gain.md |
Actualizado |
2026-05-02 |
| tci |
autostart-tci-on-launch.md |
Actualizado |
2026-05-02 |
| tci |
change-the-tci-port.md |
Actualizado |
2026-05-02 |
| tci |
enable-the-tci-server-for-log4om-sunsdr-clients.md |
Actualizado |
2026-05-02 |
| tci |
overview.md |
Actualizado |
2026-05-02 |
| tx |
enable-apd-to-linearise-the-transmitter.md |
Actualizado |
2026-05-02 |
| tx |
overview.md |
Actualizado |
2026-05-02 |
| tx |
recall-an-atu-memory.md |
Actualizado |
2026-05-02 |
| tx |
run-a-two-tone-tune.md |
Actualizado |
2026-05-02 |
| tx |
run-the-internal-atu.md |
Actualizado |
2026-05-02 |
| tx |
set-rf-output-power.md |
Actualizado |
2026-05-02 |
| tx |
set-tune-carrier-power.md |
Actualizado |
2026-05-02 |
| tx |
start-a-tune-carrier-to-check-swr.md |
Actualizado |
2026-05-02 |
| tx |
switch-tx-profiles-e-g-ssb-digital.md |
Actualizado |
2026-05-02 |
| tx |
toggle-mox-to-manually-key-the-transmitter.md |
Actualizado |
2026-05-02 |
| v0.9.2.1.md |
v0.9.2.1.md |
Actualizado |
2026-05-02 |
| v0.9.3.md |
v0.9.3.md |
Actualizado |
2026-05-02 |
| v0.9.4.md |
v0.9.4.md |
Actualizado |
2026-05-02 |
| v0.9.5.1.md |
v0.9.5.1.md |
Nuevo |
2026-05-02 |
| vfo-widget |
adjust-af-gain-and-pan-from-the-vfo-panel.md |
Nuevo |
2026-05-02 |
| vfo-widget |
apply-a-filter-width-preset-from-the-vfo-panel.md |
Nuevo |
2026-05-02 |
| vfo-widget |
assign-a-dax-channel-from-the-vfo-panel.md |
Nuevo |
2026-05-02 |
| vfo-widget |
change-mode-from-the-vfo-panel.md |
Nuevo |
2026-05-02 |
| vfo-widget |
change-the-vfo-marker-line-thickness.md |
Nuevo |
2026-05-02 |
| vfo-widget |
collapse-the-vfo-panel-to-frequency-only-view.md |
Nuevo |
2026-05-02 |
| vfo-widget |
enable-noise-reduction-from-the-vfo-panel.md |
Nuevo |
2026-05-02 |
| vfo-widget |
enable-rit-or-xit-offset-from-the-vfo-panel.md |
Nuevo |
2026-05-02 |
| vfo-widget |
enable-squelch-from-the-vfo-panel.md |
Nuevo |
2026-05-02 |
| vfo-widget |
hide-or-show-filter-edge-lines-on-the-spectrum.md |
Nuevo |
2026-05-02 |
| vfo-widget |
mute-audio-for-a-slice-from-the-vfo-panel.md |
Nuevo |
2026-05-02 |
| vfo-widget |
overview.md |
Nuevo |
2026-05-02 |
| vfo-widget |
set-a-custom-filter-edge-from-the-vfo-panel.md |
Nuevo |
2026-05-02 |
| vfo-widget |
tune-the-radio-by-typing-a-frequency-into-the-vfo-panel.md |
Nuevo |
2026-05-02 |
| wave |
adjust-waveform-amplitude-zoom.md |
Nuevo |
2026-05-02 |
| wave |
monitor-tx-or-rx-audio-on-the-waveform-display.md |
Nuevo |
2026-05-02 |
| wave |
pause-the-waveform-to-inspect-a-transient.md |
Nuevo |
2026-05-02 |
| wave |
set-the-waveform-refresh-rate-to-reduce-cpu-load.md |
Nuevo |
2026-05-02 |
| wave |
switch-the-waveform-view-mode-scope-envelope-history-bands.md |
Nuevo |
2026-05-02 |
| wave |
overview.md |
Actualizado |
2026-05-02 |
| wave |
pause-and-clear-the-waveform-display.md |
Actualizado |
2026-05-02 |
| wave |
use-the-waveform-display-to-monitor-tx-or-rx-audio.md |
Actualizado |
2026-05-02 |